Paint Basics |Terms What Do They All Mean?

Paint Basics |Terms What Do They All Mean?

Paint, what do all the terms mean; VOC paints, gloss, semi –gloss, flat etc. if the lingo of paint is a little confusing for you this is here to help understand what these terms mean and what the best paint is for each application. Here are the basics you will need to get your painting project started.

selecting the right paint

Paint Terms

VOC- stands for volatile organic compounds that are found in paint and other items around your house that can harm you. They are gases that release as the material ages over time. These can cause allergic reactions in some people, so if you can reduce the amount of these in the products you use in and around your home, the healthier the home will be. Look for products that say Low VOC.

Latex based paint- these are water based paints made with synthetic binders i.e. acrylic, vinyl and other polymers. They are easy to clean up and good for interior wall paints. If you are unfamiliar with paint I would recommend skipping the big box stores and going to your local paint store for help when selecting paint. Price typically does correlate to the quality and amount of pigments in paint. Keep in mind that top-quality paints go on more smoothly, will show less brush marks and cover in fewer coasts than cheaper paints.

Oil based paint-These paints contain drying oil which creates a film that makes the paint dry slower. Due to new technology of acrylics, oil-based paints are somewhat of yesterday.

Waterborne enamels or alkyds– these behave much like oil based paints but are water-based and have good leveling qualities for a smooth finish and maintain the performance of past oil based paints. Do NOT paint with waterborne enamels over oil based because they most likely will not adhere. It is best to sand down with fine sandpaper the surface if suspect the last coat of paint was oil base, clean and dry to prevent peeling of the new coat. These are a great choice for surfaces that see a lot of wear such as doors, cabinets, and trim.

Finishes

Matte or Flat finish– this is a finish where when dry, will be free from gloss or sheen. The surface is velvety; it absorbs and scatters the light so the finish hides imperfections well. This is an excellent option for ceilings and covering walls with a lot of imperfections. It works best in low traffic areas because it is not very easy to clean.

Eggshell or satin finish– this finish is similar to the surface of an egg, it is not shiny or glossy but it is not flat either. It is a soft finish with very little sheen. It is great for high traffic areas like hallways, kitchens, children’s rooms because it is easier to clean and can withstand repeated cleaning.

Semi-gloss or Gloss- this finish has a reflective sheen and are highly durable. Due to being very reflective anything coated in semi-gloss or gloss will emphasize any surface imperfections. Semi-gloss has a subtle shine, where gloss has more of sheen. They stand up to multiple cleanings and are traditionally used on baseboards, moldings, cabinets and doors.

Knowing the differences between the finishes and types of paint makes choosing a breeze to get the best results possible for your painting project. I have seen matte finished combined with semi-gloss on a striped wall and the results are stunningBe creative, and now confident that you will be using the right finish and paint for your projects.

Other articles to help you paint:

http://designsolutionskgp.com/how-to-paint-a-room/

http://designsolutionskgp.com/order-of-painting-a-room/


About the Author
Author

Karen GP

Comments (2)
Leave a reply

Name (required)

Website

Time limit is exhausted. Please reload CAPTCHA.